1U100SB
Power Supplies
2,400-4,500 Watt 3-Bay / Hot Swap 19” Rack Mount
For Use With: PF600 / PF800 / PF1000 / PF1200 / PF1500
Features
- 2400-4500W Output Power
- Full Load operating temperature range from –10 to +50°C
- Excellent combination of both High Reliability and Low Cost
- Full hot-swap capability, with low insertion/extraction force
- Front panel LED’s for AC OK and DC OK
- Temperature controlled fan speed, for low noise and long life
- Configurable I2C interface status and control
- Single wire active current share
- Operating Parameters adjustable via Analog or Digital Interface
- N+1 or N+M Redundancy
- Integral isolation (OR-ing) mosfets
- Stand-by power of 5V @ 250mA
- Full array of status & control signals (digital & analog)
- Remote sense: up to 0.5V cable losses compensation
- No minimum load required
- Main Output may be referenced as positive or negative
- RoHS compliant
- 2 Year Warranty
Introduction
The 1U100SB 19” Rack Mount Chassis from SAE Power combined with the PF800 / PF1200 / PF1500 power supply modules deliver up to 4500W of highly reliable DC power. These power systems are ideal for usage in today’s distributed power architectures.
These power systems offer state-of-the-art status and control func- tions in both analog (TTL) and Digital (I2C) signal sets. This fea- ture allows engineers more flexibilty and control in their system designs. The functions include remote on/off control, power sup- ply present, voltage adjustment, current monitor, AC OK, DC OK, remote sense, current share, fan fail and overtemperature warning. Multiple Racks may be interconnected for additional power and redundancy.
Typical Applications
- Distributed Power Architectures
- Server Equipment
- LAN / WAN / SAN Applications
- Network Equipment
- Automated Test Equipment
- Network Attached Storage
Certifications
Mechanical Details
| Parameter | Description |
|---|---|
| Chassis Dimensions | 17.00” (L) x 20.04” (W) x 1.72” (H) |
| Faceplate | 19” (W) x 1.72” (H) |
| Material | Steel, RoHS compliant yellow chromate finish |
| Connector | DB25 Connector (Tyco 747846-3 or 747846-4 or equivalent) |
| Weight | Each chassis weighs 12.50lbs / 5.67kg (un-populated) |
*See PF800 / PF1200 / PF1500 Specifications for Electrical Specifications.
Inter-Rack Pin Assignment
*See PF2100 Specifications for Electrical Specifications
| Pin | Function |
|---|---|
| 1 | LS_BUS |
| 2 | LS_BUS |
| 3 | STANDBY RTN |
| 4 | AC GND |
| 5 | RS485 |
| 6 | RS485 |
| 7 | STANDBY RTN |
| 8 | AC GND |
Pin Assignments
| Pin | Function |
| 1 | PW0K/A3_3 |
| 2 | PW0K/A3_2 |
| 3 | PWOK/A3_1 |
| 4 | ACOK/A2_1 |
| 5 | ACOK/A2_3 |
| 6 | ACOK/A2_2 |
| 7 | -SENSE |
| 8 | +SENSE |
| 9 | SPARE PIN |
| 10 | SCL |
| 11 | OTWN/ALT * |
| 12 | CUR MON 3 |
| 13 | PSPRESENT_3 |
| 14 | SDA |
| 15 | VSB |
| 16 | CUR MON 1 |
| 17 | CUR MON 2 |
| 18 | VO ADJ 1 |
| 19 | VO ADJ 2 |
| 20 | VO ADJ 3 |
| 21 | LS_BUS |
| 22 | PSON * |
| 23 | PSPRESENT_1 |
| 24 | PSPRESENT_2 |
| 25 | STANDBY RTN |
Mechanical Drawing
Specifications subject to change.